圆盘取样器取样面积 技术参数: 1、取样面积:100cm2 2、可切厚度:5mm 3、外形尺寸:Φ160×115mm 4、重量:1.5kg
结构调整: 1、切刀刀片为双面刀片,具有四片,为圆外接四等分均布。刀片可以更换,具体操作为:松开件5十字螺丝(每片上有4颗螺钉),取下件6刀片压板压板与件4取样刀片,换上新的刀片,压上件6刀片压板,注意使刀片口为顺时针切向并使四片刀口处于同一平面,然后拧紧5十字螺丝即可。 2、仪器底部有真纹刻痕,用手固定式样,便于切割,防止式样打滑。 3、波纹手轮下有滚花刻盘,可以用来调整所切厚度,具体方法为:松开件3锁紧螺钉,旋转件2滚花刻盘(顺时针减少,逆时针增加)。至所取厚度值,锁紧件3锁紧螺钉即可。 圆盘取样器取样面积 我公司把顾客放在首位,建立起了产品售前、售中、售后服务规范,全方位、全过程满足顾客要求,使我们的产品和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。 Our company puts the customer first, has established the product pre-sale, the sale, the after-sale service standard, the omni-directional, the entire process satisfies the customer request, causes our product and the service deep customer's trust, established A long-term cooperation and mutually beneficial relationship with customers. 公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供*优质的产品和服务。我公司一如既往在“和谐、诚信、专业、增值”价值观引领下成为公路仪器和建筑仪器一流的供应商。 The company adheres to the Tenet of "Regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and under the protection of the network The Adjuster management system, provide the best quality products and services for users. As always, our company has become the first-class supplier of highway instrument and Construction Instrument under the guidance of "harmony, integrity, professionalism and value-added" values. 原创作者:河北献县鹏翼建筑仪器厂 |