昆明市尹工定做低温弯折机完工并发货 试验程序: 1、在标准环境下,用测厚仪测量试样的厚度,试样的耐候面应无明显的缺陷。 将试样的耐候面朝外弯曲180°,使50mm(或25mm)宽的便于重合齐平,并确保不发生错位,可用固定平或订书机或10mm宽的胶布将边缘固定。 2、将弯折机的上下平板间距调到试样厚度的三倍。 3、将弯折机上平板翻开,将试样平放在上平板上,重合的一般朝向转轴,且距离转轴20mm(25mm)。将弯折机连同试样放入低温箱内,在规定的温度下保持1h(或2h),然后在1s之内将弯折机上平板压下,是达到所调间距位置,保持1s,将试样取出。待回到室温后,观察试样弯曲处是否断裂,或用放大镜观察试样弯折受拉面是否有裂纹。 4、两块(或三块)试样均不断裂或无断纹时,评定为无裂纹。
附:试验程序如与有关标准的实验法有差距,请按相关的实验要求。
公司秉承“视售后服务为产品质量的延伸,视产品质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供*优质的产品和服务。我公司一如既往在“和谐、诚信、专业、增值”价值观引领下成为公路仪器和建筑仪器一流的供应商。 The company adheres to the Tenet of "Regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and under the protection of the network The Adjuster management system, provide the best quality products and services for users. As always, our company has become the first-class supplier of highway instrument and Construction Instrument under the guidance of "harmony, integrity, professionalism and value-added" values. 我们热忱期盼与各位业内人士携手并进、共创未来! We look forward to working together with the industry to create a better future! 昆明市尹工定做低温弯折机完工并发货 |