ZKS-100砂浆凝结时间测定仪工作原理
本仪器由1.压杆,2.试针轴,3.试针座,4.钻夹头,5.接触片,6.试针,7.试模,8.压力器,9.底座,10.调节螺杆,11.调节螺母,12.立柱等组成 其原理由⑴压杆给压力通过⑵试针轴向下滑动,使⑹试针插入⑺试模内砂浆里,由于砂浆随着时间长短而凝结硬度变化,使试针得到不同的贯入阻力,在压力器上读出不同的阻力值,这就是抗压强度。 其使用时先将搅拌均匀的砂浆装入试模内,离上口平面约10毫米抹平,将试模放在压力器圆盘上,此时将压力器指针调到零位(旋动⒀调零螺母)。然后操作者用手将压杆垂直向下旋压力,在10内将试针贯入砂浆25mm,这时压力器刻度盘上所示为次测定值,同时将调节螺母⑾调到高位置(即与⑶试针座上端平面),放开压杆,试针在弹簧力作用下复位。按每半小时重复次,当阻力达到0.3Mpa时改为15分钟测定次,直到阻力值达到0.7Mpa为止 ZKS-100砂浆凝结时间测定仪参数规格 ZKS-100砂浆凝结时间测定仪 1、 检测范围:0~100N 2、 示值精度:1%N 3、 示值分辨值:0.5N 4、 大行程:50m㎡ 5、 试针截面积:Φ140×75mm 备注:本产分为2款,指针式 数显式
ZKS-100砂浆凝结时间测定仪公司介绍 本公司主要产有: 混凝土实验仪器、水泥试验仪器、养护箱、养护室、沥青试验仪器、乳化沥青试验仪器、防水卷材试验仪器、土工试验仪器、土壤试验仪器、细集料试验仪器、砌墙砖试验仪器、CA砂浆试验仪器、钢筋连接套筒等等。重点推出:混凝土压力机、混凝土搅拌机、钢筋拉拔仪、锚杆拉拔仪、水泥细度负压筛、钻孔取芯机、混凝土抗渗仪、水泥胶砂搅拌机、水泥净浆搅拌机,电动跳桌、沥青针入度、沥青软化点、沥青低温延伸仪、沥青粘度计、歇尔稳定度仪、歇尔击实仪、电动击实仪、工程试模等等这些产广泛应用于:混凝土商砼、搅拌站、实验室、高等院校、市政、公路、铁路、隧道、桥梁、石油化工、水利建设、等域本厂以合理的价格、热情的服务态度、精湛熟练的售后保障对您提供优质服务。我们本着交货迅速、实行三包、跟踪服务等经营原则竭诚为广大用户服务。 egative pressure screen, core drilling machine, concrete impermeability machine, cement mortar mixer, cement paste mixer, electric Jump Table, asphalt penetration, asphalt softening point, asphalt low temperature, Marshall Stability Instrument, Marshall compaction instrument, electric compaction instrument, engineering test model, etc. . These products are widely used in: concrete business, mixing stations, laboratories, institutions of higher learning, municipal, roads, railways, tunnels, bridges, petrochemical, water conservancy construction, and other fields of our factory to provide you with reasonable prices, warm service attitude, skilled after-sales service to provide quality services. We in line with the prompt delivery, the implementation of three guarantees, tracking service and other business principles dedicated to the majority of users. 更新时间:2024/2/20 8:46:49 标签:砂浆凝结时间测定仪 |