XNS-2土工水平渗透仪工作原理
1、先剪取一块规定尺寸的试样,并在水中饱和。 2、拧开右边进水室容器端盖上的紧固螺母,并将容器端盖拆下。 3、将试样顺机装入中间压力室的乳胶套中。 4、在紧固不锈钢上的螺母时,应将三个螺母同时拧紧,并与容器端盖之间的压力保持一致。 5、开始试验。 6、先开动加压开关,在中间容器内微加压至 2~5kpa左右,打开调水阀,使水渗入容器。 7、待水从试样中渗透至出水容器时,再根据需要加压,待压力稳定后,用量筒接取一定时间内的渗水,并计算通水量。测读通过 500cm3渗透水量的时间 ,或记录15min 内通过的水量。 每个水力梯度下平行测定3 次。 8、试验完毕后,旋转放气阀放掉气压,擦干水渍,并晾干所有橡胶制品。
XNS-2土工水平渗透仪参数规格
1、试样尺寸:宽100mm,厚3~10mm; 2、试样长度为40mm; 3、作用与试样上法向应力为0~500kPa ; 4、常水头调节范围0~800mm ; 5、自带过滤系统,除去自来水中杂质等 公司介绍 献县鹏翼建筑仪器厂是目国内生产:公路试验仪器、建筑试验仪器的企业。在国内具有较高的知名度,本公司设备全,检测手段完善,技术力量雄厚。产品严格按照国家标准设计生产,除配套供应试验仪器设备外,我厂还承担新建试验室的规划设计,设备选型,安装调试,配件供应与后勤保障等业务。 PENGYI building instrument factory in Xian County is a domestic manufacturer of highway test instrument and building test instrument. In the country has a high visibility, the company's equipment, perfect detection means, strong technical force. Products in strict accordance with National Standards Design and production, in addition to supporting the supply of test equipment, I plant also undertake the new laboratory planning and design, equipment selection, installation and commissioning, spare parts supply and logistics support business. XNS-2土工水平渗透仪 更新时间:2024/2/20 8:47:18 标签:土工水平渗透仪 |