PS-6钢筋锈蚀仪工作原理
未通外加电流,先读出阳钢筋的自然电位V(即钢筋阳与甘汞电之间的电位差值)。 接通外加电流,并按电流密度50×10-2A/m2(即50uA/cm2)调整u A表至需要值。同时,开始计算时间,依次按2、4、6、8、10、15、20、25、30、60min,分别记录阳化电位值。 试验结果处理: 以三个试验电测量得平均值,作为钢筋阳化电位的测定值,以时间为横坐标,阳化电位为纵坐标,绘制电位-时间曲线(如图B3.1)。 PS-6钢筋锈蚀仪参数规格
1、恒电位控制范围: -1.999V~ 1.999V(连续可调) 2、恒电位控制精度: 优于1mV(般为0.1 mV);电网电压变化10%研究电控 --制电位变化小于1 mV 3、输出电流测量范围:0~±2mA、0~±20mA、0~±200mA(数字电流显示) 4、输出槽压: 0~±10V 5、恒电流控制范围:0~±200mA(连续可调,给定电流分三档量程,即±2mA, --±20mA,±200mA) 6、输出电位测量范围:-1.999V~ 1.999V 电位测量精度:±1%加减末位1个字 电流测量精度:±1.5%加减末位1个字 输入阻抗: >1010Ω 7、响应速度: ≤5μS 8、化方向: 阳化/阴化 9、外接给定电位: 可由外控信号给定电位电源: 交流220V±10%50HZ,功耗 --≤50W 10、汞电(232型或222型); 11、时钟; 12、线;铜芯塑料线; 13、缘涂料(石蜡:松香=9:1); 14、拌锅、搅拌铲; 15、模:塑料有底活动模(尺寸40mm×100mm×150mm)。 钢筋锈蚀仪专用的符合本规程要求的钢筋锈蚀仪,(输出电流范围不小于0~200uA,可连续变电0~2V,精度≤1%;
PS-6钢筋锈蚀仪公司介绍 献县鹏翼建筑仪器厂是目内生产:公路试验仪器、建筑试验仪器的重点骨干企业。在内具有较高的知名度,本公司设备流,检测手段完善,技术力量雄厚。产严格按照标准设计生产,除配套供应试验仪器设备外,我厂还承担新建试验室的规划设计,设备选型,安装调试,配件供应与后勤保障等业务。 PENGYI building instrument factory is a key enterprise which produces highway test instrument and building test instrument in China. In the country has a high visibility, the company's first-class equipment, perfect means of testing, strong technical force. In addition to supporting the supply of test equipment, the factory also undertakes the planning and design of the new laboratory, equipment selection, installation and commissioning, spare parts supply and logistics support business.
PS-6钢筋锈蚀仪 公司秉承“视售后服务为产质量的延伸,视产质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产和服务。我公司如既往在“和谐、诚信、专业、增值”价值观引下成为公路仪器和建筑仪器流的供应商。 The company adheres to the Tenet of "Regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and under the protection of the network The Adjuster management system, provide the best quality products and services for users. As always, our company has become the first-class supplier of highway instrument and Construction Instrument under the guidance of "harmony, integrity, professionalism and value-added" values. 更新时间:2024/2/20 8:46:34 标签:PS-6钢筋锈蚀仪 |