ML-100B钢筋拉力计工作原理 1、检查油量 如液压泵活塞没有完全缩回缸体内时,应先通过油管连接至手压泵,逆时针方向拧松泵体上的卸荷 阀,使千斤中的液压油排回到手压泵储油桶中。 拧开注油阀,检查油量,如油不满,可加注N46号耐磨液压油或20号机油。 2、排气 液压系统组装好后,储油桶、油管及液压缸中常混有空气,为使液压系统正常,这些空气必须排掉。方法是,将手动泵放在比液压缸稍高的地方,压动手动泵,使液压油缸活塞伸出,再打开卸荷阀,使活塞缩回,连续几次即可。必要时可打开注油阀,排除储油桶内空气。 3、检测钢筋 将油管与千斤顶连接,按上述1、2项要求进行油量、排气及压力表检查。 按图2所示,将拉杆(订货时注明规格或根据实际检测情况自备),拧到锚杆末端,如拉杆内螺纹外径大于油缸中心孔,可在油缸底部增加加长套,再套上液压缸(使活塞端向外),然后拧上螺母并顺时针拧紧卸荷阀。 1被测体 2锚具 3活塞 4液压缸 5加长套 压动油泵手柄,用力应均匀,不要用力过猛,当压力表上的读数达到要求时,停止加压。 注意,手动泵必须摆成水平放置工作。检查完毕应逆时针进针方向拧松泄阀,使压力表读数为零,再把各部件由钢筋上卸下。 如检测的钢筋或钢筋外端头没有螺纹,无法与拉杆连接时,可选我厂的MJ—1型6—38不同规格的锚具。 ML-100B钢筋拉力计参数规格
手压泵大工作压力:60Mpa 质量:11kg 柱塞直径:高压28mm 低压:10mm 千斤顶工作能力:200KN 拉力行程:80mm 备注:本产共有3种,10吨 20吨 30吨 指针式和数显式
ML-100B钢筋拉力计公司介绍 我公司把顾客放在位,建立起了产售、售中、售后服务规范,全方位、全过程满足顾客要求,使我们的产和服务深得顾客的信赖,与顾客建立起了长期合作和互利关系。 Our company puts the customer first, has established the product pre-sale, the sale, the after-sale service standard, the omni-directional, the entire process satisfies the customer request, causes our product and the service deep customer's trust, established A long-term cooperation and mutually beneficial relationship with customers. 公司秉承“视售后服务为产质量的延伸,视产质量为企业生命”的宗旨,在网络化的售后服务管理体系的保障下,为用户提供优质的产和服务。我公司如既往在“和谐、诚信、专业、增值”价值观引下成为公路仪器和建筑仪器流的供应商。 The company adheres to the Tenet of "Regard after-sales service as the extension of product quality, regard product quality as the life of the enterprise" , and under the protection of the network The Adjuster management system, provide the best quality products and services for users. As always, our company has become the first-class supplier of highway instrument and Construction Instrument under the guidance of "harmony, integrity, professionalism and value-added" values. ML-100B钢筋拉力计
更新时间:2024/2/20 8:46:35 标签:钢筋拉力计 |